General purpose cleaner suitable for cleaning and degreasing bare metal, existing finishes, and primers prior to sanding.
It is the least aggressive of the Sikkens solvent-based cleaners. M600 is not recommended for plastic or fiberglass parts.
Degreasers are solvents specially formulated to remove grease and other contaminants from bare metal, existing finishes, plastic, etc.
Sikkens has M600 Surface Cleaner and Anti-Static Surface Cleaner available to best suit your shop and the substrate to be degreased.
Degreasers are solvents specially formulated to remove grease and other contaminants from bare metal, existing finishes, plastic, etc.
Sikkens has M600 Surface Cleaner and Anti-Static Surface Cleaner available to best suit your shop and the substrate to be degreased.
Autoclear Mix & Matt 250 is a VOC compliant, two-component, intermixable, multi-purpose matt clearcoat designed for use over Autowave.
This clearcoat is conveniently designed for total resprays or edge-to-edge applications. The assortment consists of two clearcoats – a semi-gloss and matt finish, which can be mixed to achieve a variety of gloss levels; and a hardener and reducer.
Autoclear Mix & Matt 250 is a VOC compliant, two-component, intermixable, multi-purpose matt clearcoat designed for use over Autowave.
This clearcoat is conveniently designed for total resprays or edge-to-edge applications. The assortment consists of two clearcoats – a semi-gloss and matt finish, which can be mixed to achieve a variety of gloss levels; and a hardener and reducer.
OTO Bodycoat is a water-based coating intended to prevent chipping of paint systems under impact of stone and gravel on lower body panels.
OTO Quick Degreaser is a very aggressive cleaner, suitable for cleaning bare steel and aluminum surfaces, old existing 2K paint finishes (with the exception of thermoplastic acrylic finishes); especially for removing solvent solvable wax from new body parts.
OTO Quick Degreaser is a very aggressive cleaner, suitable for cleaning bare steel and aluminum surfaces, old existing 2K paint finishes (with the exception of thermoplastic acrylic finishes); especially for removing solvent solvable wax from new body parts.
Primer PO is a fast drying, transparent adhesion primer.
Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified.
Primer PO should be used only on those plastic parts that have no existing primer or other coating applied. This product is available in a can as well as an aerosol version.
Primer PO is a fast drying, transparent adhesion primer.
Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified.
Primer PO should be used only on those plastic parts that have no existing primer or other coating applied. This product is available in a can as well as an aerosol version.
Primer PO is a fast-rying, transparent adhesion primer.
Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified.
Primer PO should be used only on those plastic parts that have no existing primer or other coating applied. This product is available in a can as well as an aerosol version.
Primer PO is a fast-rying, transparent adhesion primer.
Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified.
Primer PO should be used only on those plastic parts that have no existing primer or other coating applied. This product is available in a can as well as an aerosol version.
Primer PO LV is a VOC complaint, fast-drying, transparent adhesion primer that is specially designed for flexible plastic car parts manufactured from polyolefin, polypropylene and/or ethylene propylene modified.
Primer PO LV should be used only on those plastic parts that have no existing primer or other coating applied.
Primer PO LV is a VOC complaint, fast-drying, transparent adhesion primer that is specially designed for flexible plastic car parts manufactured from polyolefin, polypropylene and/or ethylene propylene modified.
Primer PO LV should be used only on those plastic parts that have no existing primer or other coating applied.
Primer Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer.
Primer Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer.
Primer Surfacer EP II is a gray, MIR-Compliant, chromate-free epoxy primer supplied in an aerosol version.
Hardener designed for use with Primer Surfacer EP II.
Reducer SRA 4.5 is a specialty solvent designed for dissolving the overspray and fade out edge created during spot repairing or blending.
Reducer SRA 4.5 can be used with any Sikkens acrylic urethane clearcoat. The mix of special solvents in Reducer SRA 4.5 assists in making a seamless transition from repair to existing finish.
Reducer SRA 4.5 is a specialty solvent designed for dissolving the overspray and fade out edge created during spot repairing or blending.
Reducer SRA 4.5 can be used with any Sikkens acrylic urethane clearcoat. The mix of special solvents in Reducer SRA 4.5 assists in making a seamless transition from repair to existing finish.