OTO Bodycoat is a water-based coating intended to prevent chipping of paint systems under impact of stone and gravel on lower body panels.
OTO Quick Degreaser is a very aggressive cleaner, suitable for cleaning bare steel and aluminum surfaces, old existing 2K paint finishes (with the exception of thermoplastic acrylic finishes); especially for removing solvent solvable wax from new body parts.
OTO Quick Degreaser is a very aggressive cleaner, suitable for cleaning bare steel and aluminum surfaces, old existing 2K paint finishes (with the exception of thermoplastic acrylic finishes); especially for removing solvent solvable wax from new body parts.
Primer PO is a fast drying, transparent adhesion primer.
Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified.
Primer PO should be used only on those plastic parts that have no existing primer or other coating applied. This product is available in a can as well as an aerosol version.
Primer PO is a fast drying, transparent adhesion primer.
Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified.
Primer PO should be used only on those plastic parts that have no existing primer or other coating applied. This product is available in a can as well as an aerosol version.
Primer PO is a fast-rying, transparent adhesion primer.
Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified.
Primer PO should be used only on those plastic parts that have no existing primer or other coating applied. This product is available in a can as well as an aerosol version.
Primer PO is a fast-rying, transparent adhesion primer.
Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified.
Primer PO should be used only on those plastic parts that have no existing primer or other coating applied. This product is available in a can as well as an aerosol version.
Primer PO LV is a VOC complaint, fast-drying, transparent adhesion primer that is specially designed for flexible plastic car parts manufactured from polyolefin, polypropylene and/or ethylene propylene modified.
Primer PO LV should be used only on those plastic parts that have no existing primer or other coating applied.
Primer PO LV is a VOC complaint, fast-drying, transparent adhesion primer that is specially designed for flexible plastic car parts manufactured from polyolefin, polypropylene and/or ethylene propylene modified.
Primer PO LV should be used only on those plastic parts that have no existing primer or other coating applied.
Primer Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer.
Primer Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer.
Primer Surfacer EP II is a gray, MIR-Compliant, chromate-free epoxy primer supplied in an aerosol version.
Hardener designed for use with Primer Surfacer EP II.
Reducer SRA 4.5 is a specialty solvent designed for dissolving the overspray and fade out edge created during spot repairing or blending.
Reducer SRA 4.5 can be used with any Sikkens acrylic urethane clearcoat. The mix of special solvents in Reducer SRA 4.5 assists in making a seamless transition from repair to existing finish.
Reducer SRA 4.5 is a specialty solvent designed for dissolving the overspray and fade out edge created during spot repairing or blending.
Reducer SRA 4.5 can be used with any Sikkens acrylic urethane clearcoat. The mix of special solvents in Reducer SRA 4.5 assists in making a seamless transition from repair to existing finish.
Reducer SRA 7.0 and Reducer SRA Aerosol are specialty solvents designed for dissolving the clearcoat fade out edge created during spot repairing or blending.
Reducer SRA can be used with any Sikkens acrylic urethane topcoat or clearcoat. The mix of special solvents in Reducer SRA assists in making a seamless transition from repair to existing finish.
Reducer SRA 7.0 and Reducer SRA Aerosol are specialty solvents designed for dissolving the clearcoat fade out edge created during spot repairing or blending.
Reducer SRA can be used with any Sikkens acrylic urethane topcoat or clearcoat. The mix of special solvents in Reducer SRA assists in making a seamless transition from repair to existing finish.
Reducer SRA 7.0 and Reducer SRA Aerosol are specialty solvents designed for dissolving the clearcoat fade out edge created during spot repairing or blending.
Reducer SRA can be used with any Sikkens acrylic urethane topcoat or clearcoat. The mix of special solvents in Reducer SRA assists in making a seamless transition from repair to existing finish.
Reducer SRA 7.0 and Reducer SRA Aerosol are specialty solvents designed for dissolving the clearcoat fade out edge created during spot repairing or blending.
Reducer SRA can be used with any Sikkens acrylic urethane topcoat or clearcoat. The mix of special solvents in Reducer SRA assists in making a seamless transition from repair to existing finish.
Reducer SRA 7.0 and Reducer SRA Aerosol are specialty solvents designed for dissolving the clearcoat fade out edge created during spot repairing or blending.
*Due to changes in CARB regulations, only batches of this product produced before January 1, 2017 will be compliant in California for the duration of the shelf life of this product.
Reducer SRA 7.0 and Reducer SRA Aerosol are specialty solvents designed for dissolving the clearcoat fade out edge created during spot repairing or blending.
*Due to changes in CARB regulations, only batches of this product produced before January 1, 2017 will be compliant in California for the duration of the shelf life of this product.